Difference between revisions of "BIOS Release Notes"
From 3dfxBIOS
Jump to: navigation, search
(Created page with "== Napalm (Voodoo4 / Voodoo5) == <spoiler text="Version 0.01 (04/30/1999)"> * Initial Version of Napalm BIOS. * Based on the Avenger BIOS version 2.11. </spoiler> <spoiler t...") |
m |
||
| (8 intermediate revisions by the same user not shown) | |||
| Line 338: | Line 338: | ||
* MAIN.ASM | * MAIN.ASM | ||
** Updated the copyright year to 2000. | ** Updated the copyright year to 2000. | ||
| + | </spoiler> | ||
| + | |||
| + | <spoiler text="Version 0.26a (01/12/2000)"> | ||
| + | * Changed device ID to 09h | ||
| + | * OEM.INC | ||
| + | ** Changed device ID to 09h | ||
| + | </spoiler> | ||
| + | |||
| + | <spoiler text="Version 0.26b (01/13/2000)"> | ||
| + | * Fixed bug with TRS BIOS hanging | ||
| + | * OEM.ASM | ||
| + | ** In Find3DFXCard, added check to see if running TRS BIOS before doing SSID check. Will skip SSID check if TRS BIOS. | ||
| + | * OEM.INC | ||
| + | ** Changed the following parameters: | ||
| + | *** DramInit0 = 00169D25h | ||
| + | *** DramInit1 = 4056C031h | ||
| + | *** MCLK = B406h | ||
| + | </spoiler> | ||
| + | |||
| + | <spoiler text="Version 0.26c (01/14/2000)"> | ||
| + | * Fixed memory sizing bug. | ||
| + | * OEMPOST.ASM | ||
| + | ** In InitRegisters, removed the DramInit0 mask to not clear DramInit0[26] | ||
</spoiler> | </spoiler> | ||
<spoiler text="Version 0.27 (01/15/2000)"> | <spoiler text="Version 0.27 (01/15/2000)"> | ||
* Create build options for Napalm board Assy# 879, 880, 881, 882, 883 and 884. | * Create build options for Napalm board Assy# 879, 880, 881, 882, 883 and 884. | ||
| − | |||
| − | |||
| − | |||
* OEM.INC | * OEM.INC | ||
| − | |||
** Changed the following parameters: | ** Changed the following parameters: | ||
| − | |||
*** DramInit1 = 00046C031h | *** DramInit1 = 00046C031h | ||
*** MCLK = 02805h | *** MCLK = 02805h | ||
| − | |||
| − | |||
| − | |||
| − | |||
</spoiler> | </spoiler> | ||
| Line 618: | Line 632: | ||
</spoiler> | </spoiler> | ||
| − | <spoiler text="Version 1.16 (08/18/ | + | <spoiler text="Version 1.16 (08/18/2000)"> |
* Fixed errors in BIOS default extended mode timings. | * Fixed errors in BIOS default extended mode timings. | ||
* Fixed bug with BIOS GTF register programming routine. | * Fixed bug with BIOS GTF register programming routine. | ||
Latest revision as of 22:54, 14 December 2015
Napalm (Voodoo4 / Voodoo5)
- Initial Version of Napalm BIOS.
- Based on the Avenger BIOS version 2.11.
- Added 1280x1024 panel timings. By default, BIOS assumes a 1024x768 panel where CR1D[6]=0. To tell the BIOS a 1280x1024 panel is attached, CR1D[6]=1.
- Fixed bug with some ROM binaries not booting. Fixes PRS#5619
- OEM.ASM
- Modified the routines GetSubdeviceID and GetSubvendorID to get the offset to the tblPCIInfo table from read C000:0018 instead of using the tblPCIInfo label.
- Modified the Panel routine to check if a 1280x1024 panel is attached to determine which set of panel timings to load.
- Created the routine GetPanelSize, to return the size of panel currently attached.
- OEM.INC
- Created the field FL_PANEL1280 for determing when a 1280x1024 panel is attached.
- OEMDATA.ASM
- Added 1280x1024 panel timings into tblExtRegisters and the XLCD_Patch_Table table.
- Create one universal ROM for both SDRAM and SGRAM. Added support for 32Meg and 64Meg of video memory.
- OEM.ASM
- In OEMSignOn, modified the sign on message to also print if SDRAM or SGRAM was detected.
- Replaced the SDRAM_BIOS compile option with a call to the routine CheckIfSGRAM in the following routines:
- InitRegisters
- OEMGetMemSize
- Modified OEMSignOn to handle 32Meg and 64Meg sign on message.
- Modified OEMGetMemSize to handle return 32Meg and 64Meg of memory installed.
- OEM.INC
- Removed all the conditional compile options for SDRAM.
- Removed the "-SD" and "-SG" from the STR_OEMVERSION string.
- Created the field FLD_SDRAMBOARD. This is tested against DramInit1 to determine if SDRAM or SGRAM memory.
- OEMDATA.ASM
- Created the strings szSDRAM_Memory and szSGRAM_Memory.
- Created the strings sz32768K and sz65536K.
- In the 32K ROM only, moved all the routines that are executed only during POST into the upper 32K of the ROM. These routines will be discarded after VGA POST s executed.
- BIOSEND.ASM
- For the 32K ROM only, added 1500 bytes of padding, db 1500 dup (FFh), to push the BIOS POST past the 32K barrier.
- INIT.ASM
- For the 32K ROM only, added code to patch the ROM size to 32K at C000:0002 and the PCI Info block. This patch isn't executed if the BIOS detects that the ROM size at C000;0002 is set to 64K.
- This is to work around an issue on the Compaq 5240 machine.
- MAIN.ASM
- Set the 32K ROM size to report a 40K ROM. This is later patched to report 32K by the routine InitBIOS.
- MAKEFILE
- Added the new file OEMPOST.ASM into the build process. Modified the link process to link INIT.obj and OEMPOST.obj after BIOSEND.obj.
- OEMDATA.ASM
- Modified the compile option for tblExtRegisters table.
- Removed the TV parameters for the tblExtRegisters table for a non-TV BIOS.
- For the 32K BIOS only, modified the PCI Info block to report a 40K BIOS.
- This is later patched to report 32K by the routine InitBIOS.
- OEMPOST.ASM
- NEW FILE
- Moved all VGA POST routines into this files. These POST routines are:
- OEMInitBIOS
- OEMInitWakeUp
- OEMNoMonitor
- OEMSignOn
- InitIOBase
- InitRegisters
- Moved all VGA POST routines into this files. These POST routines are:
- NEW FILE
- OEM.INC
- In the EXTREGS structure, added a LCD and TV compile option for xrTVOutIdx.
- OEM.ASM
- Moved routines which are only needed during POST to OEMPOST.ASM.
- Merge the routines GetSubdeviceID and GetSubvendorID into GetSSID.
- Fixed bug with Protect mode Set Display Start Address routine, function 07h, not properly detecting the start of Vertical start. This fixes problem with SciTeck Display Doctor not displaying the correct frame rate during the page flipping test.
- OEMDATA.ASM
- Modified the VBE protected mode function, Set Display Start Address, to also look for active display when checking for VSYNC. This will guarantee you will find the start of VSYNC.
- Updated all the LCD centering parameters so that they are centered on the panel.
- Fixed bug in GetExtRegsEntry routine to properly load parameters from the EXTREGS table for 200, 350, and 400 scanline text mode.
- OEM.ASM
- Modified GetExtRegsEntry routine to properly load parameters from the EXTREGS table for 200, 350, and 400 scanline text mode.
- OEMDATA.ASM
- In tblModeDescriptions, changed the internal mode number for modes 00,01,02,03, to 00, 01, 02, and 03h.
- In tblExtRegisters, adjusted all the 1024x768 panel CR04, CR05, CR10, and CR11 settings to center the image on the panel.
- Modified the VESA DDC EDID read routine to read DDC from the panel when active.
- Added code to check if a panel is detected during POST.
- Added code to check if we want to force a SVideo/Composite or autodetect the type of TV attached.
- Added to check for if the panel supported Panel side scaling.
- VESA.ASM
- Modified the DDCReadEDID routine to read EDID from the panel when panel is active.
- Created the routine ReadFP_EDID to read EDID data from the panel.
- OEMPOST.ASM
- In OEMNoMonitor, added code to check if a panel is connected.
- In OEMInitRegisters, added code to read the NVRAM to determine if we want to autodetect the TV or force the TV setting.
- OEM.ASM
- Added the routines CheckForPanel and I2CWriteRegister for checking if a panel is attached.
- Added the routines I2CReadBusXBytes and I2CReadByte to read DDC information from the panel.
- Added the routine ChecKFPSideScaling to read the DDC information from the panel and determine if scaling is supported in the panel.
- OEM.INC
- Created the flag FL_PANELSCALING to set CR1D[5] when panel side scaling is supported.
- Fixed bug with 32K version of the TSR BIOS hanging when loading.
- Updated all the bank switching routines to reflect new defination of Read/Write Appeture in VgaInit0 and VgaInit1
- INIT.ASM
- In the InitBIOS routine, add a conditional compile option around the 32K ROM size patch to compile it into a ROM binary and not a RAM binary. Fixes bug with 32K TSR hanging while loading.
- OEM.ASM
- Modfied the following bank switch routines to reflect the new Read/Write Appeture bit definations in VgaInit0 and VgaInit1.
- OEMSetBank, OEMSetWBank, OEMGetWBank, OEMSetRBank, OEMGetRBank, OEMIncBank, OEMIncWBank, OEMDecWBank, OEMIncRBank and OEMDecRBank.
- Fixed bug with the size 32K BIOS wasn't being patched during POST. Bug caused by fix for 32K TSR BIOS hang.
- INIT.ASM
- Moved the patch for the 32K ROM BIOS size into the routine Patch32KROM in OEMPOST.ASM.
- MAIN.ASM
- In init_code, made a call to Patch32KROM when compiling a 32K ROM BIOS only.
- OEMPOST.ASM
- Created the routine Patch32KROM to patch the ROM size when compiling a 32K ROM BIOS.
- Fixed bug with some VGA modes not coming up on the TV.
- OEMDATA.ASM
- Modifed all the VGA 320x200 TV modes to use the 320x200 TV parameters. Fixes bug with 320x200 VGA modes not being displayed on the TV.
- OEM.ASM
- In FixUpTV, Fixed bug in MISC register programming which caused Mode 7 not to display on the TV.
- Fixed bug with TV subcarrier signal not properly being generated.
- OEMDATA.ASM
- Modified TVData Tables to add BT869 register corrections for Sub-carrier frequency adjustment of NTSC and PAL outputs. Voodoo3 PRS#6772
- OEM.ASM
- Added BT869 register writes neccessary to adjust the Sub-carrier frequency so that we will be within 50ppm in NTSC and 25ppm in PAL output. Voodoo3 PRS#6772
- OEM.INC
- Updated the TVData structure to handle programming the additional Brooktree registers.
- Fixed bug with not being able to compile a TV BIOS.
- Modified the routines which read the TV type to read it from the EEPROM instead of Scratch Register 2.
- During POST, EEPROM byte 0 is read to verify valid TV data is present. If TV data isn't valid, EEPROM byte 0 is written with valid TV data.
- OEM.ASM
- Modified IsNTSCMode, IsPALMode, and GetPALMode to read the TV configuration from the EEPROM byte 0.
- Modified routines which checked if composite TV is active to use the equate FLD_COMPOSITE instead of a hard coded value.
- OEM.INC
- Created the equate FLD_COMPOSITE and CFG_TV_MASK.
- OEMPOST.ASM
- Extern defined the I2C routines to fix problem with not being able to compile a Napalm TV BIOS.
- In InitRegisters, removed the code which set Scratch Register 2 to the TV mode.
- In InitRegisters, added code to verify that EEPROM byte 0 has valid TV data. If not valid, EEPROM byte 0 is written with valid TV data.
- Created the routine I2CWriteAuxEEPROM, for writing data to the EEPROM.
- Modified routines which checked if composite TV is active to use the equate FLD_COMPOSITE instead of a hard coded value.
- Fixed bug with 350 scanline modes not being displayed on the TV.
- OEM.ASM
- In FixupTVOut, made sure Misc. Output[7:6] are 11b to force Hsync and Vsync to positive.
- OEMPOST.ASM
- In InitRegisters, changed the default for no CRT, TV, nor LCD attached to CRT only.
- OEM.INC
- Updated the Napalm CHIP ID to 07h
- OEMPOST.ASM
- Removed the PUSH and POP BX call from the TV code in InitRegisters. This fixes the system hang bug when not doing TV autodetection.
- OEMDATA.ASM
- Renamed all the 18Xh mode numbers to 12Xh. Refer to the document MODELIST.DOC for mode numbers.
- Redefined the usage of the scratch registers. Made CR1E for TV data and CR1F for DFP data only. Defination of the scratch register usage is documented in "Scratch Register Usage.XLS".
- Created the routine GetPanelSize to read the DFP EDID data to determine the size of the attached panel. The size of the panel is stored in scratch register 2, CR1F.
- Created the routine CalcNVRAMchecksum to recalculate the NVRAM checksum after writing data to the NVRAM.
- OEM.ASM
- Moved the CheckForPanel and CheckFPSideScaling routines to OEMPOST.ASM since this is actually once during POST.
- Created the routine IsPanelSideScaling to return if the attached panel support panel side scaling.
- Modified the GetPanelSize routine to read the panel size from SCRATCH_REG3.
- Modified the routine I2CReadByte to PUSH ans POP AX. AX needs to be preserved for the Panel sizing routine.
- Modified IsPanelAttached routine to read Scratch Register 2, CR1F, bit 1.
- OEM.INC
- Removed the equates FL_PANEL1280 and FL_PANELSCALING.
- Created the following equates for panel size and panel side scaling:
- SCRATCH_REG3
- CFG_DFP_SIZE_MASK, CFG_DFP_SIZE_1024, CFG_DFP_SIZE_1280, CFG_DFP_SIZE_1600, FLD_EDID_1280, FLD_EDID_1024, FLD_EDID_800, FLD_PANELSCALING
- OEMPOST.ASM
- Created the following routines for reading the panel size: DeterminePanelSize and CheckIfSupportedPanelSize.
- Moved the following routines from OEM.ASM into OEMPOST.ASM: CheckFPSideScaling and CheckForPanel.
- Created the routine CalcNVRAMchecksum which calcaultes and writes the Checksum of the NVRAM to byte offset 127. This routine is called after writing the NVRAM.
- In OemNoMonitor, changed thecode to set TV active to use the FLD_TV_ACTIVE equate instead of the 020h value.
- Added support for centering modes on non-scalable DFP.
- Renamed the "Panel" routine to "FixupPanel"
- OEM.ASM
- In FixupPanel, added code to handle progamming the VGA registers for non-scalable panels.
- OEM.INC
- Modified the EXTREGS structure to handle CRTC settings for CR02, CR03, CR15, and CR16 for 1024x768 and 1280x1024 panels.
- OEMDATA.ASM
- Expanded the tblExtRegisters table for CR02, CR03, CR15, and CR16 settings for 1024x768 and 1280x1024 panels.
- Modified the Panel EDID routine to use the procedures IsCRTAttached and IsPanelAttached instead of hard coding the routine to read from specific registers.
- VESA.ASM
- Modified the panel code in DDCReadEDID to use the routine IsCRTAttached and IsPanelAttached to see if the device is attached before determining to read EDID from the panel or CRT.
- OEM.ASM
- Created the routine IsCRTAttached to return if the CRT is active.
- Added code into the FixupPanel return to support programming the CRTC and PLL registers for scaled panels.
- Created the routine GetDetailedTimingXYRes to parse a panel EDID detailed timing block and return the XY resolution for that detailed timing block.
- Created the routine ParseAndProgramDetailedTiming to parse a detailed timing block, calculate the CRTC and PLL parameters, and program the CRTC and PLL parameters.
- Created the routine DoWePatchVGAmodes to return if we need to patch the CRTC parameters for the current VGA mode.
- Modified the routine I2CReadByte to preserve DX.
- OEMDATA.ASM
- Renamed the refereces to FLD_CRT to FLD_CRT_ACTIVE.
- OEM.INC
- Renamed the equate FLD_CRT to FLD_CRT_ACTIVE.
- Fixed bug with panel not being enabling scale panels in DOS after setting CR1F=09h.
- For a 32K ROM only, the BIOS needed to update the ROM checksum after discarding the POST. Fixes failure with Elpin test T0920.EXE.
- OEM.ASM
- In the FixUpPanel routine, moved the code which set REG_VIDINFORMAT to 8000h to the top of the routine. This ensures that REG_VIDINFORMAT is always set when programming the panel.
- OEMPOST.ASM
- In Patch32KROM, added code to recalculate the BIOS checksum.
- Fixed problem with halved extended modes (320x200, 320x240, 400x300 and 512x384) not being displayed on the DFP.
- NOTE: Currently, the halved modes only use half of the screen horizontally but full screen vertically. The issue with halved extended mode using half of screen horizontally will still need to be addressed.
- BIOSPARM.INC
- Created labels for the 640x480, 800x600, and 1024x768 default timings. Fixed up the horizontal blank times for all the 800x600 and 1024x768 timings.
- OEM.ASM
- Created externs for the 640x480, 800x600, and 1024x768 VGA tables.
- In FixupPanel,
- Added support for doing 320x200, 320x240, 512x384, and 400x300 modes.
- Modified the code which patched CR02 to decreament the CR02 value by 1 instead of copying the CR01 value. This helped fixing the problem with halved modes not coming up.
- In ParseAndProgramDetailedTimings,
- CR01, Horizontal Display End, is NOT updated when in doing a halved mode.
- CR05, Horisontal sync End, is foced to 1Fh for halved modes.
- Created the routine ProgramCRTCPanelTimings read and program the CRTC timings in BIOSPARM.INC.
- Created the routine IsHalvedExtMode to return if we're a halved extende mode mode.
- Merged in all the Napalm 0.20 changes onto the StarTeam Napalm BIOS.
- Added support for doing 320x240, 400x300, and 512x384 modes centered on a scaling DFP.
- OEMDATA.ASM
- Created CRTC panel timings for 320x240, 400x300, and 512x384 modes on a scaled DFP.
- OEM.ASM
- Created externs for the 320x240, 400x300, and 512x384 DFP CRTC timings in OEMDATA.ASM.
- In the FixupPanel routine, for scaled panels only:
- Disabled scanline doubling. VIDPROCCFG[4] = 0.
- For the 320x240, 400x300, and 512x384 modes, loaded the 320x240, 400x300, and 512x384 CRTC timings instead of the 640x480, 400x300 and 1024x768 timings.
- Fixed problem with modes being too far to the right by skewing the image to the left by writing MiscInit0 [10:08].
- In ProgramCRTCPanelTimings, expanded the CRTC registers which are programmed to include CR12, CR09, CR10, and CR11.
- Renamed all the "XLCD" references to "DVI". To build an DVI, set VGABIOS_OPT=-DBUILD_DVI_BIOS
- Added support for new BoardConfig DWORD into new OEMConfig structure. BoardConfig return information about the boards memory type, bus type, TV out support, DVI support, CRT support, and if the I2C lines are shorted.
- OEM.ASM
- Renamed all the "XLCD" references to "DVI".
- OEM.INC
- Added the equates BoardI2CLineShorted, BoardCRTSupport, BoardMemType, BoardTVOutSupport, and BoardDFPSupport.
- Renamed all the "XLCD" references to "DVI".
- OEMDATA.ASM
- Renamed all the "XLCD" references to "DVI".
- Created the word variable OEMConfigVer which is right before the tblOEMConfig label. OEMConfigVer stores the current version of the OEMConfig table.
- Created the variable "Reserved" to word align the variable fBoardConfig variable.
- Created the variable fBoardConfig to store the board configuration.
- OEMPOST.ASM
- Renamed all the "XLCD" references to "DVI".
- VESA.ASM
- Renamed all the "XLCD" references to "DVI".
- Expand the NTSC 640x400 and 320x200 modes to be full screen on the TV.
- Modified build process to support only have needed one compile flag to build a BIOS.
- Updates the OemConfig structure to return the chip name, oem board name, and version number.
- OEM.ASM
- In FixupTVOut, patched the Brooktree TV timings when doing 640x400 and 320x200.
- OEM.INC
- Changed the following variables from "EQU" to "=". This make it possible to change the value of the variable during the compile.
- VARIATION_001, VARIATION_002, VARIATION_003, VARIATION_005, ROM_64K, OPTIMIZED_ROM, FB_High_Priority, TVOUT_BIOS, PAL_BIOS, DVI_BIOS, MCLK_183MHZ, MCLK_166MHZ
- Created the following variables:
- BoardI2CLineShorted
- BoardCRTSupport
- SDRAM_BIOS
- BoardMemType
- BoardBusType
- BoardTVOutSupport
- BoardDFPSupport
- Moved the STR_OEMPRODUCT into each board compile option. Each build option has a unique OEM Product string. The BIOS will now print is the BIOS supports TV or DFP.
- Changed the PCI device to 07h for Napalm.
- OEMDATA.ASM
- Modified the NTSC TVDATA structure to use the new 640x400 and 320x200 full screen TV timings.
- Update the OEMConfig structure to include the VBE product name, OEM Chip name, and OEM BIOS version.
- Created the null terminated strings for Chip name and BIOS Version.
- Changed the panel CRTC timings to fix bug with setmode hanging while in a full screen DOS session in Win98.
- OEMDATA.ASM
- In the tblExtRegisters table, changed the CR11 panel setting for the following modes to not set CR11[4]. Fixes GPF error when setting these panel modes.
- 1024x768 panel timings: Updated timings for all 512x384 modes and 640x400x16bpp.
- 1280x1024 panel timings: Update timings for modes 07*, 00*, 01*, 02*, 03*, 00/01+, 02/03+ and 07+.
- In the tblExtRegisters table, changed the CR11 panel setting for the following modes to not set CR11[4]. Fixes GPF error when setting these panel modes.
- Overscanned the NTSC 640x350 TV parameters to be full screen on the TV. Ratio used were HOC = 13.78 and VOC = 9.88.
- OEMDATA.ASM
- Changed the NTSC 640x350 TVDATA table entries to support 640x350 overscanned parameters.
- OEM.ASM
- In FixupTVOut, added code to program the Brooktree TV encoder to do overscanned 640x350 NTSC timings.
- OEM.INC
- Changed the PCI device to 07h for Napalm.
- Create build options for Napalm board Assy# 874 and 872.
- Updated the copyright year to 2000.
- "Copyright (C) 1990-2000 Elpin Systems, Inc."
- OEM.INC
- Create build options for Napalm board assy #874, -DBUILD_V5P874 and #872, -DBOARD_V4P872.
- DATA.ASM
- Updated the copyright year to 2000.
- MAIN.ASM
- Updated the copyright year to 2000.
- Changed device ID to 09h
- OEM.INC
- Changed device ID to 09h
- Fixed bug with TRS BIOS hanging
- OEM.ASM
- In Find3DFXCard, added check to see if running TRS BIOS before doing SSID check. Will skip SSID check if TRS BIOS.
- OEM.INC
- Changed the following parameters:
- DramInit0 = 00169D25h
- DramInit1 = 4056C031h
- MCLK = B406h
- Changed the following parameters:
- Fixed memory sizing bug.
- OEMPOST.ASM
- In InitRegisters, removed the DramInit0 mask to not clear DramInit0[26]
- Create build options for Napalm board Assy# 879, 880, 881, 882, 883 and 884.
- OEM.INC
- Changed the following parameters:
- DramInit1 = 00046C031h
- MCLK = 02805h
- Changed the following parameters:
- Fixed bug in DOS extended mode Write TTY and scrolling function.
- For DFP only, set tmuGBEInit[18]=1 to select a delay of 4. Also set VidInFormat[22] to disable tv_data_scramble. This fixes the problem with wrong colors on the panel.
- Fixed bugs in bank switching code.
- Fixed bug with boot on TV only.
- Added work-around to memory VBE memory size routines. BIOS VBE memory sise functions will return 16 Meg on board when running on 32 and 64 Meg boards.
- Changed board designs #872, #882, #883 and #884 from SGRAM to SDRAM.
- OEM.ASM
- In FixupPanel, set tmuGBEInit[18]=1 to select delay of 04h. Also set VidInFormat[22] to disable tv_data_scramble to fix the problem with wrong colors on the panel.
- In OemGetWBank and OemGetRBank, fixed bug with not properly getting bits 11 and 10 of the apperture.
- Removed the routine CheckIfProduction. Not needed in Napalm.
- OEM.INC
- Changed the build options for board designs #872, #882, #883 and #884 from SGRAM to SDRAM.
- OEMDATA.ASM
- In VBEPMI05, code needed to be modified to handle Napalm's defination of appeture in VGAInit1.
- OEMPOST.ASM
- In OemNoMonitor, removed the call to checkIfProduction from the TV portion of the code.
- SCROLL.ASM
- Modified all the routines which called the bank switching routine to pass DX and not just DL.
- VESA.ASM
- In VBE_ReturnControllerInfo and VBEGetmemSize routines, changed the memory size routine to return 16 Meg on board when running on 32 and 64 Meg boards.
- Modified DFP DDC code to use DDC code instead of the I2C code.
- Fixed bug with DDC code not sending a NACK after reading last byte.
- Addressed the following PRS:
- #12558 - 320x200x8bpp locks the system when attempting to set 60hz or 65hz in VBETEST.
- #12553 - 1024x768x8@90Hz shows incorrect refresh rate.
- #12555 - 1280x1024x8@65Hz and 70Hz show incorrect refresh rate.
- OEM.ASM
- In PatchVertDisplayTime, fixed bug with BIOS being stuck in an infinite loop if vertical total bit 9 = 0. Fixes PRS#12558.
- In OEMDDCDisable, changed the AND mask to 09FFBFFFFh to also reset the GPIO port back to 00.
- Created the routine DDCEnableDFP to setup the DDC calls to the panel. This includes setting up the GPIO port to read DDC data from the DFP.
- In SetAbsoluteDotClock, created a software work around to fix the problem with certain PLL settings causing th PLL to not generate the desired output frequency. Address PRS #12553 and #12555.
- VESA.ASM
- Removed the routine ReadFP_EDID and calls to this routine.
- In DDCStartupSequence, added code to check for an attached panel. If a panel is attached, call DDCEnableDFP to setup the DDC call to read DDC data from the DFP.
- In DDCRead, placed a PUSH CX and POP CX around call to DDCWaitClockHigh. Fixed bug with a NACK never being sent to the monitor after reading the last byte of DDC data. This enables the BIOS to read DDC data from a Compaq FP720 DFP.
- Changed the name of the routine I2CReadByte to DFPReadByte. This routine now uses DDC calls to read DFP EDID data. This change fixes the problem with detecting scaled and non-scaled DFPs and also scaled DFPs now fully supported. Also fixes problem with scaled DFP not coming up in VGA modes.
- OEM.ASM
- Renamed all the calls to I2CReadByte to DFPReadByte.
- DFPReadByte now uses DDC calls to read DFP EDID data.
- OEMPOST.ASM
- Renamed all the calls to I2CReadByte to DFPReadByte.
- Fixed bug with Flight Simulator 5.0 showing garbage when moving around the mouse cursor during a game. Fixes PRS#12642
- OEM.ASM
- In OemSetWBank, did a PUSH and POP EBX at the start and end of the routine.
- Changed BIOS chip name string to "VSA 100".
- Fixed bug in CheckForPanel routine. Would always return panel attached, even though no panel is attached.
- Fixed bug with DFP/TV combo BIOS not booting to TV only properly. Fixes PRS#12528.
- Removed unnecessary XLCD code and DFP I2C routines.
- OEM.INC
- Change the STR_OEMCHIPNAME string to "VSA 100".
- OEM.ASM
- Removed the routine I2CWriteRegister_Panel. Not needed since Napalm uses DDC calls.
- OEMPOST.ASM
- Removed the extrn for I2CWriteRegister and added an extrn for DDCEnableDFP.
- In CheckForPanel, called the routine DDCEnableDFP to enable access to the DFP. Removed old XLCD code.
- Changed the PCI Empty low water mark, PCIInit0[6:2], from 0x01 to 0x08.
- Changed the BIOS dot clock algorithm for finding PLL settings. This change only effects GTF modes and scaled panel support. This fix addresses PRS#12553 and #12555
- OEM.INC
- Changed the DEFAULT_PCIINIT0 from 00584FB04h to 00584FB20h.
- OEM.ASM
- In SetAbsoluteDotClock, removed the software work-around which patch PLL settings to get hi-res modes to work. This work-around was for PRS #12553 and #12555.
- In CalcClockWord, updated the algorithm for finding PLL settings for a specified dot clock.
- Created the routine CheckVCO to validate PLL setting before they are used.
- Changed the PCIInit0 setting from 0184FB20 to 01840320h.
- Forced DramInit0[30] = 1 to always do SDRAM even thou we're running on SGRAM.
- OEM.INC
- Changed DEFAULT_PCIINIT0 to 01840320h.
- OEMDATA.ASM
- Made the variable fBoardConfig public.
- OEM.ASM
- Modified the routine CheckIfSGRAM to use the variable fBoardConfig instead of testing DramInit0[30].
- OEMPOST.ASM
- In InitRegisters, always set DramInit0[30]=1 to force SDRAM.
- Changed the default DramInit timings for 143MHz MCLK.
- DramInit0 = 00016A9B9h
- DramInit1 = 000200031h
- PLLCtl1 (MCLK) = 3A05h = 143MHz
- Fixed problem with some default BIOS modes PLL value causing the mode to "swim". Updated the PLL values for the following VBE modes:
- Extended Text Modes 109h-10Ch, 320x200, 320x240, and 512x384.
- Also adjusted the PLL setting for the TV modes.
- Changed the sign-on message to report the total amount of memory on board. This includes the memory on the slave chips.
- Added a 128 Meg memory entry into the memory size string.
- CLKPLL.INC
- NEW FILE
- Include file which holds the equates of all the VGA and VBE mode clock PLL setting.
- NEW FILE
- OEMDATA.ASM
- Made all the CLK PLL setting into equates and put the equates into CLKPLL.INC.
- Updated the memory size strings to include a 128 Meg entry.
- Modified the SDRAM and SGRAM memory message strings to say "Total SDRAM " and 'Total SGRAM ".
- OEM.INC
- Changed memory clock to 143MHz PLLCTRL1=3A05h and DramInit0 = 00016A9B9h and DramInit1 = 000200031h.
- OEMPOST.ASM
- In OEMSignOn, adjusted the reported memory size depending if we're a 4-way or 2-way SLI board.
- MAKEFILE
- Added CLKPLL.INC as part of the dependencies for OEMDATA.ASM.
- Fixed problem with DDC read errors on LG Flatron 759-FT CRT monitor.
- Updated the CLK PLL settings for NTSC and PAL 800x600.
- Modified TV code to always disable the CRT when TV is active. CRT is disabled by setting MiscInit1[8]=1, Power down CRT DAC.
- Added code to disable the TV interface, vidInFormat[15] = 0, when TV or DFP is not active. Fixes problem with TV showing garbage when TV is disabled and CRT is enabled.
- CLKPLL.INC
- Changed the PLL setting for 36MHz, PAL 800x600 TV clock, and 38.769MHz, NTSC 800x600 TV clock.
- VESA.ASM
- Added additional clock delays to the DDC routines. This fixes the problem with reading DDC information from LG Flatron 759-FT CRT monitor.
- OEM.ASM
- In OEMSetRegs, disabled the TV interface when TV or DFP is not active.
- In OEMSetRegs, diabled the CRT when TV is active.
- Created a BIOS to run the part at 166MHz. Changed the default MCLK to 166MHz and the DramInit1 setting to 00240031h.
- OEM.INC
- Changed the MCLK setting to 166MHz, 720Dh, and the DRAMInit1 setting to 00240031h.
- OEM.INC
- To improve performance, changed the DramInit0 value to 00116A9A9h.
- Disabled PCI memory retries, PCIInit0[12]=1, to fix problem with dropped pixels in VGA mode.
- Updated MCLK PLL and DramInit settings.
- Current Settings are as follows:
- MCLK = 166MHz (E721h)
- DramInit0 = 001EA9B9h
- DramInit1 = 00240031h
- Current Settings are as follows:
- Disabledd sync on slave chips only on 2-way and 4-way boards.
- OEM.INC
- Changed PCIInit0 = 01841320h, 166MHz MCLK PLL = E721h, DramInit0 = 001EA9B9h, and DramInit1 = 00240031h.
- OEMPOST.ASM
- In OEMInitBIOS, added conditional compile code to disable the sync on the slaves chips only on 2-way and 4-way BIOSs.
- Corrected VPD Checksum to allow for (ICT) Production BIOS programming.
- MAIN.ASM
- Changed VPD Checksum from 0x85 to 0x79
- Set VidProcCfg[29:28] = 11 to disable memory optimization.
- OEMPOST.ASM
- In InitRegisters, set VidProcCfg[29:28] = 11b.
- OEM.ASM
- In OemSetRegs, did a Read-Modify-Write of VidProcCfg. Preserved bits 29-28.
- Fixed errors in VBE mode timings for 1024x768 graphics and 132xXX text modes. Fixes PRS# 14384 and 14386.
- During POST, initilized I/O base address before calling OEMEnableExtentions. Fixes PRS#14303.
- BIOSPARM.INC
- Made the sync polarities for 1024x768 both negative. Timings now follow the VESA/STB spec for this mode. Fixes PRS#14384.
- OEMPARM.INC
- Fixed timing error in horizontal blank end, and horizontal sync start and end. Timings now follows the VESA/STB spec for this mode. Fixed PRS#14386.
- OEMPOST.ASM
- In OEMInitWakeup, called InitIOBase before calling OEMEnableExtnsions. Fixes PRS#14303.
- Added build for Assy# 0896 (VD5 5500 PCI) at 155MHz.
- OEM.INC
- Value of PLLCTRL1 set to 0x3F05 for 155MHz PCI assembly. Will not affect any other assembly.
- Removed build options for V5P847 and V5P874. This reflects the current version of the Napalm Board BIOS Names and Build opts.doc.
- OEM.INC
- Removed the build options for V5P847 and V5P874.ROM.
- Modified the V5P896 build option to have vidProcCfg[29:28]=00 and all other BIOS builds have vidProcCfg[29:28] = 11.
- OEM.INC
- Created the flag Build_V5P896. This flag is set only when compiling a V5P896 BIOS.
- OEMPOST.ASM
- In InitRegisters, added conditional compiled code to clear VidProcCfg[29:28]=00 when compiling a V5P896 BIOS. All other BIOSs have VidProcCfg[29:28]=11.
- Removed the modification of the V5P896 build - vidProcCfg[29:28]=00.
- Reset the Clock for the V5P869 to 166MHz.
- OEM.INC
- Reset the flags so V5P869 will build at 166MHz.
- OEMPOST.ASM
- Removed the following flag and code:
- In InitRegisters, added conditional compiled code to clear VidProcCfg[29:28]=00 when compiling a V5P896 BIOS. All other BIOSs have VidProcCfg[29:28]=11. (All products have VidProcCfg[29:28]=11.)
- Removed the following flag and code:
- Created compile flag to disable the display of the copyright message during POST.
- OEM.INC
- Created the flag DisableCopyrightMsg to display tje copyright message. This flag is enabled by the comple flag "-DTURN_OFF_COPYRIGHT_MSG".
- INIT.ASM
- In InitBIOS, conditionally compiled the code which display the copyright banner.
- Fixed bug with some CRT monitors booting monochrome. Fixes PRS#15126.
- Fixed bug with booting to TV on BIOSs which has both TV and panel support.
- INIT.ASM
- Changed the Monitor Sense DAC value, Default_Trigger, from a 18h to 15h. This fixes the problem with some CRT monitors booting monochrome. Fixes PRS#15126.
- VESA.ASM
- In the routine DDCWaitClockHigh, decreased the number of retries from 65536 to 256. This decreased the time one had to wait for the TV to boot on a combo TV and DVI BIOS.
- OEMPOST.ASM
- In the routine CheckForPanel, fixed bug with error checking. This fixed a bug in the combo TV and panel BIOS where the BIOS to booted to the panel when only a TV attached.
- OEM.INC
- Changed DramInit0 to 0001EA9A9h. Made tRP = 2, row precharge = 3 clocks.
- Updated BIOS build options to include the following boards:
- V5P901 - AGP/SD/183 MHz/No TV/No LCD/V5-5800
- V5P899 - AGP/SD/166 MHz/No TV/No LCD/V5-5500
- V5P896 - PCI/SD/166 MHz/No TV/No LCD/V5-5500
- V5P902 - AGP/SG/166 MHz/No TV/No LCD/V5-5000
- V5P899 - AGP/SD/166 MHz/No TV/No LCD/V5-5500
- Removed the following BIOS build options:
- V5P874 - AGP/SG/166/No TV/No LCD/V5-5000
- V5P847 - PCI/SG/166/No TV/No LCD/V5-5000
- V5P884 - PCI/SD/166/With TV/With LCD/V4-4500
- Change the memory clock for the V5P848 BIOS to 183 MHz.
- OEM.INC
- Added build options for the following boards: V5P901, V5P899, V5P896, V5P902, V5P899.
- Removed build options for the following boards: V5P874, V5P847, V5P884.
- Change the memory clock for the V5P848 to 183 MHz.
- Decreased the ampount time it took to execute video POST. For a BIOS with no copyright message, video POST when from ~191 mSec to ~155 mSec.
- INIT.ASM
- In InitInfoVars, modified the setmode calls to not clear the screen and only initilize the registers.
- In the MonitorDetect routine, routine the code which initilizes the RAMDAC to 00h. A setmode call later in POST will re-initilize the DAC to it's default value.
- OEMPOST.ASM
- In Patch32KRom, optimized the checksum routine to not reload the added ROM during each iteration of the loop. Started the ROM address at 00h and had the LODSB automaticlly increament the address.
- Fixed errors in BIOS default extended mode timings.
- Fixed bug with BIOS GTF register programming routine.
- Condensed the board name strings.
- DATA.ASM
- Added conditional compiled code to only print the string "Supported " after the board name when compiling a TV and/or LCD BIOS.
- BIOSPARM.INC
- Updated the horizontal and vertical sync start and and positions for the following modes: 640x400, 640x480, 800x600, 1024x768, 1280x1024 and 80x60 (Mode 108h).
- OEMPARM.INC
- Updated the horizontal and vertical sync start and and positions for the following modes: 320x200, 320x240, 400x300, and 512x384.
- OEM.ASM
- In OEMFixupCRTC, decreased the vertical sync start and end values by one. Only decreaced the horizontal sync start and end value by one when not doing a 1024x768 mode.
- Created the routine CheckIf1024Mode to check if we're a 1024x768 mode. If 1024x768 mode, zero flag is set.
- Updated the BIOS build options to match the Napalm BOM in MRD ver 1.19.
- OEM.INC
- Removed the build option for the V5P901 AGP/SD/166MHz/No TV/No DVI/2 Way.
- Change the MCLK for V5P848 to 166MHz.
- Added a BIOS option for V4P906 AGP/SD/143MHz/No TV/No DVI/Single chip.
- Fixed bug with all extended modes coming up corrupted when going into extended mode. Bug is with Napalm2 SGRAMMODE value being programming into Napalm. Fixes PRS#15511.
- OEM.INC
- Made the SGRAMMODE register setting coniditional compile for Napalm and Napalm2. Fixes problem with Napalm2 SGRAMMODE setting being used on Napalm. Fixes PRS#15511.
Daytona (Voodoo4-2)
- Initial version of the Napalm2 BIOS
- Merged Napalm2 changes into Napalm source. Added to support the strapping option field in Napalm2.
- MAKEFILE.N2
- NEW FILE
- Napalm2 makefile. Uses the flag "-DBUILD_NAPALM2_BIOS" to enable Napalm2 build options.
- NEW FILE
- FFF0DATA.ASM
- NEW FILE
- File to hold the strapping options data.
- NEW FILE
- OEM.INC
- Created the flag "Napalm2_BIOS" to enable Napalm2 code. By default, Napalm2_BIOS = 0, which disabled Napalm2 options.
- Created a seperate BIOS version string and device ID for Napalm2.
- OEMPOST.ASM
- In Patch32KROM, added code to shadow the strapping option data into the 40K region.
- Modified the BoardConfigurtion byte to report back DDR memory on board.
- Created a board configuration for Napalm2. This is PCI/DDR/166/No TV/No LCD V4P872.
- Updated memory sizing routine to support changes in DramInit0[29:27] and tmuGbeInit[27:25].
- Made Napalm2 device ID equal 0013h.
- OEM.ASM
- Created a Napalm2 board configuration V4P872, PCI/DDR/166/No TV/No LCD.
- Made the Napalm2 device ID 0013h.
- Created the flag DDR_BIOS to flag DDR board. BoardMemType is set to 02h a DDR BIOS.
- OEMPOST.ASM
- In InitRegisters, did a read-modify-write of tmuGbeInit to preserve bits 27 to 25.
- In OemSigon, called CheckIfDDR to determine is DDR or SDRAM memory. If DDR, print DDR memory size message. Otherwise, print SDRAM memory size message.
- OEMDATA.ASM
- Added the memory size string szDDR_memory.
- Added memory size message for 256Meg of memory.
- OEM.ASM
- Updated the table tblMemSize to support reporting back 128Meg and 256Meg of video memory.
- Updated the routine OemGetMemSize to read tmuGbeInit[27:25] if 32Mbit DDR memory is installed. If so, the memory size is divided by 4.
- Created the routine CheckIfDDR to return is DDR on board.
- Fixed bug with some CRT monitors booting monochrome. Fixes PRS#15126.
- Fixed bug with booting to TV on BIOSs which has both TV and panel support.
- INIT.ASM
- Changed the Monitor Sense DAC value, Default_Trigger, from a 18h to 15h. This fixes the problem with some CRT monitors booting monochrome. Fixes PRS#15126.
- VESA.ASM
- In the routine DDCWaitClockHigh, decreased the number of retries from 65536 to 256. This decreased the time one had to wait for the TV to boot on a combo TV and DVI BIOS.
- OEMPOST.ASM
- In the routine CheckForPanel, fixed bug with error checking. This fixed a bug in the combo TV and panel BIOS where the BIOS to booted to the panel when only a TV attached.
- OEM.INC
- Changed DramInit0 to 0001EA9A9h. Made tRP = 2, row precharge = 3 clocks.
- Decreased the ampount time it took to execute video POST. For a BIOS with no copyright message, video POST when from ~191 mSec to ~155 mSec.
- INIT.ASM
- In InitInfoVars, modified the setmode calls to not clear the screen and only initilize the registers.
- In the MonitorDetect routine, routine the code which initilizes the RAMDAC to 00h. A setmode call later in POST will re-initilize the DAC to it's default value.
- OEMPOST.ASM
- In Patch32KRom, optimized the checksum routine to not reload the added ROM during each iteration of the loop. Started the ROM address at 00h and had the LODSB automaticlly increament the address.
- Fixed errors in BIOS default extended mode timings.
- Fixed bug with BIOS GTF register programming routine.
- Condensed the board name strings.
- Fixed bug in memory sizing routine.
- Updated PCI device ID to 0Bh.
- Put in memory timings for 100MHz MCLK.
- DATA.ASM
- Added conditional compiled code to only print the string "Supported " after the board name when compiling a TV and/or LCD BIOS.
- BIOSPARM.INC
- Updated the horizontal and vertical sync start and and positions for the following modes: 640x400, 640x480, 800x600, 1024x768, 1280x1024 and 80x60 (Mode 108h).
- OEMPARM.INC
- Updated the horizontal and vertical sync start and and positions for the following modes: 320x200, 320x240, 400x300, and 512x384.
- OEM.ASM
- In OEMGetMemSize, saved the memory size in AX.
- In OEMFixupCRTC, decreased the vertical sync start and end values by one. Only decreaced the horizontal sync start and end value by one when not doing a 1024x768 mode.
- Created the routine CheckIf1024Mode to check if we're a 1024x768 mode. If 1024x768 mode, zero flag is set.
- OEMPOST.ASM
- In InitRegisters, change the Napalm2 DramInit0 register mask to 072000000h DramInit1 register mask to 0C3000000h. Added Napalm2 code to do a mode set to the memory and to the DLLs on the DDR memory only.
- OEM.INC
- Change the Napalm2 memory clock to 100MHz.
- Shortened all the STR_OEMPRODUCT strings for the TV and LCD BIOSs.
- Removed the words "with" and "support" from the string. For example, changed the LCD BIOS from "Voodoo4 4800 with LCD support " to "Voodoo4 4800 LCD ".
- Added memory clock PLL settings for 210MHz, 200MHz, 170MHz, 125MHz and 100MHz.
- Changed the Napalm2 device ID to 0Bh.
- Created Napalm2 conditional compiled code for DramInit settings:
- For MCLKs below 143MHz, the following is used:
- DEFAULT_DRAMINIT0 equ 0807FE9A9h
- DEFAULT_DRAMINIT1 equ 040034031h
- For MCLKs above or equal to 143MHz, the following is used:
- DEFAULT_DRAMINIT0 equ 0807FE9A9h
- DEFAULT_DRAMINIT1 equ 040030031h
- For MCLKs below 143MHz, the following is used:
- Changed the Napalm2 DEFAULT_SGRAMMODE setting to 00002000h.
- Change MCLK to 143MHz and the DramInit0 timings.
- Changed TV out clock delay to 10 clocks, TmuGbeInit[19:16]=0Ah, for DFP.
- Created temporary build options for the following BIOSs:
- V4P882-2.ROM PCI/DDR/143/No TV/With LCD | V4-4200
- V5P902-2.ROM AGP/DDR/143/No TV/No LCD/2 Way | V5-5000
- V4P868-2.ROM AGP/DDR/143/No TV/No LCD | V4-4000
- V4P869-2.ROM AGP/SDR/143/No TV/No LCD | V4-4000
- OEM.INC
- Changed the Napalm2 MCLK to 143MHz.
- Changed the Napalm2 MCLK 143MHz<= DramInit0 to 040034031h.
- OEM.ASM
- In FixupPanel, changed the TmuGbeInit[19:16] to 0Ah, 10 clock TV clock out delay.
- FFF0DATA.ASM
- Changed the strapping information to:
- dw 00000h ;0xFFF6/0xFFF7
- dw 00000h ;0xFFF4/0xFFF5
- dw 0C400h ;0xFFF2/0xFFF3
- dw 00000h ;0xFFF0/0xFFF1
- Changed the strapping information to:
- OEMPOST.ASM
- Modifed the copyright message to properly display is the BIOS supports DDR or SDR memory.
- OEMDATA.ASM
- Add strings to display total DDR or SDR memory.
